DARRIN P/S 5006
09-24-2005, 06:40 PM
I have a 308 inch rotating assembly for a SBF..Heres' the parts list
1..Stock Crank..Cut 10 under and with some weight savings and polishing done....50oz balance
2. Stock rods 5.09 race prepped and shot peened/polished with 5/16 rod bolts
3.Probe ''RACE" Pistons part # F2480 .040..Pistons have a few small nicks on the exhaust side from valve tapping the top of the pistons..there are 2 new pistons installed on # 5 & 6 ( No damage)
4..C & A Gappless rings
5..King Race bearings thruout the motor.
400.00 plus shipping for this....will be out of engine ofter NMRA BG race.
This assembly has been 7700 RPM's with no problem what so ever...Plus it been balanced (50oz)...all parts are ready to reinstall.
All parts have less than 100 miles on them...all were new when when first machined.
Thanks
1..Stock Crank..Cut 10 under and with some weight savings and polishing done....50oz balance
2. Stock rods 5.09 race prepped and shot peened/polished with 5/16 rod bolts
3.Probe ''RACE" Pistons part # F2480 .040..Pistons have a few small nicks on the exhaust side from valve tapping the top of the pistons..there are 2 new pistons installed on # 5 & 6 ( No damage)
4..C & A Gappless rings
5..King Race bearings thruout the motor.
400.00 plus shipping for this....will be out of engine ofter NMRA BG race.
This assembly has been 7700 RPM's with no problem what so ever...Plus it been balanced (50oz)...all parts are ready to reinstall.
All parts have less than 100 miles on them...all were new when when first machined.
Thanks