Adam Smith
12-14-2005, 10:16 AM
1998GT
Engine--stock 1998 shortblock
2001 PI heads/intake(unported)
VT Stage 1 cams
Accufab 75mm TB/Plenum
Pro-M 87MM MAF
Steeda U/D pulleys
Meizere Electric Water pump (not even installed yet)
Flowtech Longtube headers
Flowtech O/R X-pipe
Flowmaster mufflers
Tranny
Stock 1998 4R70W
Precision Industries 3800stall converter (Single disc)
24,000GVW B&M Tranny cooler
J-modded to highest HP level
Custom line pressures/shift points with SCT software
Suspension
PA Racing Chromoly K member
PA Racing Chromoly A arms (Fox Body specific)
PA Racing Coil Overs
Afco 14x175lb springs
Strange 10 way adjusatble struts
UPR 4-Bolt Caster/Camber Plates
Rear suspension is 100% stock with the exception of 1/2 coil cut from stock springs
All 4 OEM rear shocks are fairly new
Rearend
FRPP 4:10 Gear
COMPLETE rebuild(all gears,bearings races,seals, clutch packs new)
Misc
Oddessy PC680 Lightweight Battery with brushed aluminum holder
New front hubs with 3" ARP studs
Rear Mosier studs
Tires/wheels
6-Weld Draglights 4-15x8" 2 15x3.5"
2-26x8.5" M/T Slicks
2-295/50/15 Street tires (still have tits on them)
2-165/15 Euro Radials (Pep Boys)
4-Stock 5-star pony wheels with 255/55/16's
Extra studs and lugnuts
I am sure there is other stuff that I am forgetting
Car is loaded, cloth interior. I bought it with 120,000miles on it back in June of 03. I have put about 10,000 miles on it since then. 99% of these parts have less than 5000 miles on them, some of them not more than a few hundred. Car does not smoke or use oil. It has run 12.61@109mph in 1000DA weighing 3270 with driver. Car is easily a 12.50 car as is in good air. Car comes with 99% of receipts. Car is straight, and clean, never any damage. Car is completley streetable, or perfect for bracket racing I have 2 other vehicles that I drive instead of this, another reason it needs to go. Whatever stock parts I still have will go with car. $9000 possible partial trade for 03Cobra Any questions you have pm me or email me at adam@modularmisfits.com. pics availible too.
Adam
Engine--stock 1998 shortblock
2001 PI heads/intake(unported)
VT Stage 1 cams
Accufab 75mm TB/Plenum
Pro-M 87MM MAF
Steeda U/D pulleys
Meizere Electric Water pump (not even installed yet)
Flowtech Longtube headers
Flowtech O/R X-pipe
Flowmaster mufflers
Tranny
Stock 1998 4R70W
Precision Industries 3800stall converter (Single disc)
24,000GVW B&M Tranny cooler
J-modded to highest HP level
Custom line pressures/shift points with SCT software
Suspension
PA Racing Chromoly K member
PA Racing Chromoly A arms (Fox Body specific)
PA Racing Coil Overs
Afco 14x175lb springs
Strange 10 way adjusatble struts
UPR 4-Bolt Caster/Camber Plates
Rear suspension is 100% stock with the exception of 1/2 coil cut from stock springs
All 4 OEM rear shocks are fairly new
Rearend
FRPP 4:10 Gear
COMPLETE rebuild(all gears,bearings races,seals, clutch packs new)
Misc
Oddessy PC680 Lightweight Battery with brushed aluminum holder
New front hubs with 3" ARP studs
Rear Mosier studs
Tires/wheels
6-Weld Draglights 4-15x8" 2 15x3.5"
2-26x8.5" M/T Slicks
2-295/50/15 Street tires (still have tits on them)
2-165/15 Euro Radials (Pep Boys)
4-Stock 5-star pony wheels with 255/55/16's
Extra studs and lugnuts
I am sure there is other stuff that I am forgetting
Car is loaded, cloth interior. I bought it with 120,000miles on it back in June of 03. I have put about 10,000 miles on it since then. 99% of these parts have less than 5000 miles on them, some of them not more than a few hundred. Car does not smoke or use oil. It has run 12.61@109mph in 1000DA weighing 3270 with driver. Car is easily a 12.50 car as is in good air. Car comes with 99% of receipts. Car is straight, and clean, never any damage. Car is completley streetable, or perfect for bracket racing I have 2 other vehicles that I drive instead of this, another reason it needs to go. Whatever stock parts I still have will go with car. $9000 possible partial trade for 03Cobra Any questions you have pm me or email me at adam@modularmisfits.com. pics availible too.
Adam