Need A K Member! 96 or Newer.

[Chalie Sr.]

[Ok Here We Go,
Looking for a stock k memeber from a 96 or newer Mustang.
pm me.
Later,

[Mike Washington]

Call Justin.......

Laters
Mike Washington

[KenB]

[Ok Here We Go,
Looking for a stock k memeber from a 96 or newer Mustang.
pm me.
Later,

got one. can bring to bg. sorry i never got back to you. we can talk at bg.

[Eric@JPC]

i might have a white one???!!!

:D

[tank6675]

uncle chal, i hope that k member doesnt have anything to do with my old 88 coupe that is sitting in your garage completely ripped apart does it?

[Ryan Hecox]

whats different about the K-member from a fox or a sn95? they bolt in the exact same location and look completely identical. Someone let me know =)

[Brr Mrr]

whats different about the K-member from a fox or a sn95? they bolt in the exact same location and look completely identical. Someone let me know =)

the rear tabs are different !!!! between them .......... are you going
to modify the K member ??????

it is not a direct bolt in !!!


but we have one if you need it !!!

[f/s 4valve]

whats different about the K-member from a fox or a sn95? they bolt in the exact same location and look completely identical. Someone let me know =)

one fast word ryan




modular

[Ryan Hecox]

one fast word ryan




modular


But the word Modular by itself means "composed of standardized units or sections for easy construction or flexible arrangement"

So again, I ask, Whats different? :D

When I took out my 4v I ordered a K-member and told them I needed one for a SN95 with a 5.0.... there response was the same as mine.... "Whats the difference?"

So I layed mine on the floor next to it and they look identical.

[f/s 4valve]

engine mounts i beleive are differnt

[Eric@JPC]

the 94 and up are wider, but i do beilve the motor mount holes are all in the same location!

basically the 94+ k member will not fit in a fox because its to wide! i do belive a mod motor will bolt right on a fox k-member. Never tried though? i would rather modify some motor mounts then trying to make a newer k-member fit an older car. Besides dont the rules say you cant modify the K-member

[Ryan Hecox]

the 94 and up are wider, but i do beilve the motor mount holes are all in the same location!

basically the 94+ k member will not fit in a fox because its to wide! i do belive a mod motor will bolt right on a fox k-member. Never tried though? i would rather modify some motor mounts then trying to make a newer k-member fit an older car. Besides dont the rules say you cant modify the K-member


The K-members have the same engine mounts, same chassis mounts, same measured width.... the control arms are different, spindles, etc.....

K-member= same =)

[f/s 4valve]

the 94 and up are wider, but i do beilve the motor mount holes are all in the same location!

basically the 94+ k member will not fit in a fox because its to wide! i do belive a mod motor will bolt right on a fox k-member. Never tried though? i would rather modify some motor mounts then trying to make a newer k-member fit an older car. Besides dont the rules say you cant modify the K-member

no you cant modify the k member

[Chalie Sr.]

Hi Guys,
I was told that if you want to put a mod motor in a fox body you need a newer k memeber.! I would love to not have to change the k memeber! I guess I need to contact tech and see if I can modify the fox k memeber.The car is going to get the roll cage done and chassis done and then we will see. Oh yea it will be a AOD to. He He.
Tank really likes to be different. Hope to have it ready for Florida.
Later,

[Eric@JPC]

The K-members have the same engine mounts, same chassis mounts, same measured width.... the control arms are different, spindles, etc.....

K-member= same =)

False... just ask AJE and DD i went through this shit like 2 years ago at JPC...

http://www.uprproducts.com/shopping/shopdisplayproducts.asp?id=64

2nd product down Please select year

[Teddy]

Engine mounts are different.

[Ryan Hecox]

False... just ask AJE and DD i went through this shit like 2 years ago at JPC...

http://www.uprproducts.com/shopping/shopdisplayproducts.asp?id=64

2nd product down Please select year

I understand what your saying, but thats only because they are being sold with control arms which are different. I went through this also 2 years ago trying to get the right one for my car and when I called UPR they told me they were all the same and the differences were in the control arm lengths and ball joints. Said the K members were the same. The trouble with installing the 5.0 into the sn95 body was when using factory mounts the engine sat too high in the engine bay. That has to do with the body design, not the k member. I will take some more measurements tomorrow. I could very well be wrong. I am only speaking of the experience I went through when I took out my 4v and installed the pushrod.