PDA

View Full Version : MIR Who Won?


Chalie Sr.
10-23-2006, 08:37 PM
Hello,
Anybody go? Who won?
Thank's,
Chalie Rankin

Jonathan Paulk
10-24-2006, 10:36 AM
This is cut and pasted from Shannon (Ryan's wife) over on Racer's Den.net, with some minor editing...

Factory Stock
Unfortunatley Eric (something wrong with the motor, only qualified 11th, fixed it Sat night) went out in the semis to John Paulk (at least it was another JPC car that advanced to the finals) but I think he did pretty good considering the motor had just been put back together on Friday and he had been busting his ass on little sleep to accomplish it. Jonathan input: I won, with a 11.68, car was breaking up in the big end. Eric went a 11.50 and 11.51 first and second round @ 121 and 120 MPH!!! I went high 50s during qualifying and 1.55 60fts every pass and high 115 MPH a couple passes. In the semis I got the hole shot on Eric, .045 to a .311, he was sideways and I had tire shake, MOV was .1463 and Eric went 120 MPH, again. I was only running 11.60s during eliminations, playing with fuel pressure. I was in full NMRA trim except for no pass headlight, and tapped up front end. Eric had a oval TB and ovaled upper Bullit Intake

Modular shootout
Tommy Godfrey, JPC's New salesman =) Went out in the semis against Justin. Justin pulled out a 10.20 now keep in mind that was with no nitrous and drag radials......so that was an extremley impressive number for him to put down. Justin won the Modular class, it was heads up....

Mild Street
Ron Cullember ran 10.70s all weekend (another JPC car) went out in the Semis to Teddy Weaver who then had to face Ryan in the Finals. The final between Teddy and Ryan was crazy close with Teddy going 10.34 to Ryan's 10.36......but Ryan got him off the tree! All in NMRA trim....

Wild Street
Rich Groh met with Brian Mitchell in the Finals.....Rich (Im pretty sure these number are right or at least close) went a 8.63 to Brian Mitchells 8.61 again Rich getting him on the tree!!! I believe all in NMRA trim...

Super Street Outlaw
Don Burton got loose at the front end of the track and let out of it......and his opponent (not sure of his name) was able to get out on him but then got a little squirrley himself and Don was able to put the smack down and win the race.....his opponent was definatley a hell of a driver, he was all over the wall half way down the track! ( only a couple feet, maybe a foot from it) Burton went 40s in qualifying, I believe in NMRA trim......

Teddy
10-24-2006, 11:26 AM
Jonathan,

Do you know of anyone who might have a picture of the finals between Ryan and I? That was the first pass ever my car hooked like that, and no one I know got a pic. All's I have are the scratches on the rear bumper:D

Ryan Hecox
10-25-2006, 11:25 AM
Teddy, I will send you a copy of the finals when I get home this evening.

I got a few more scratches on my bumper too in round 2 of qualifying.

CLICKY HERE (http://www.youtube.com/watch?v=S3SWE6KHzh0)

nosdog2
10-25-2006, 03:06 PM
Nice!!! Good job representing JPC.

Eric@JPC
10-25-2006, 10:24 PM
1st of all Jon thanks for letting the world know how bad i suck at Life, SInce i cant Cut a Light.

2nd of all the MPH was off in the Left Lane, I think Teddy went 136 and Ryan Went 135 or something in the left lane there. The 1/8th mile stuff was correct but 121 is BS.

It was a great Weekend, i got 4 hours of sleep and worked on my junk all weekend!

Jonathan Paulk
10-26-2006, 07:14 AM
I don't think you suck at cutting a light, it was the car not reacting, it spun instead of hooking. If the car would of hooked you/the car would of cut a better light and might of went around me!!! Yep, you worked your but off for this event and it wasn't even a points race.....I was cutting the best lights of my career on a .400 tree, because the car was finally hooking, .150s shallow staging.....every pass in qualifying the car went 1.55X 60ft, yes every pass......and nearly the indentical reaction time....

Teddy
10-26-2006, 07:54 AM
Teddy, I will send you a copy of the finals when I get home this evening.

I got a few more scratches on my bumper too in round 2 of qualifying.

CLICKY HERE (http://www.youtube.com/watch?v=S3SWE6KHzh0)

Thanks, can't wait to see it:D

MP John
10-26-2006, 10:11 AM
Congrat's to the whole JPC crew (crowd). A very good way to end the season. See everybody in Orlando.

Ed Curtis
10-26-2006, 11:03 AM
GEEEEZZZZUSSSSS

You guys need to move some ballast around!

Ed

Teddy
10-26-2006, 03:13 PM
GEEEEZZZZUSSSSS

You guys need to move some ballast around!

Ed

That's something I've never had the luxury of doing.:rolleyes:

Ryan Hecox
10-27-2006, 10:24 AM
naaaah, just tighten up the struts a bit and she stays on the ground.

Teddy, my comcast online storage account for my videos is full and cant figure out how to delete them.... Once I figure out where to store it I will send you the link.

Teddy
10-27-2006, 11:31 AM
naaaah, just tighten up the struts a bit and she stays on the ground.

Teddy, my comcast online storage account for my videos is full and cant figure out how to delete them.... Once I figure out where to store it I will send you the link.

Thanks! Have you watched the video? Can you see my car in the launch or just down track? Thanks!

Ryan Hecox
10-27-2006, 12:38 PM
Thanks! Have you watched the video? Can you see my car in the launch or just down track? Thanks!

You can only see it bounce on the 1-2 shift.